To Next Page

To Previous Page

Vital Signs Monitor User’s Manual

Chapter 9-4

9.5 Setting Temp

9.5.1 Setting Unit

1. Select “TEMP” to enter the temp setup menu.

2. Set【Unit】to【℃】or【℉】. The new unit will become effective at the next

monitoring.

9.5.2 Setting Alarm

Select【menu】→【Alarm Setup】 to enter the alarm setup menu. Set the alarm

level and alarm limit. The setting value will become effective at the next monitoring.

9.6 Temp Alarm

1. The main unit temperature alarm:

 If the measured value is lower than 34.0℃, an alarm for that the temperature

is lower than the low limit occurs.

 If the measured value is higher than 43.0℃, the alarm for that the temperature

is higher than the high limit occurs.

 If the ambient temperature is lower than 10.0℃, the alarm for that the ambient

temperature is lower than the low limit occurs.

 If the ambient temperature is higher than 40.0℃, the alarm for that the

ambient temperature is higher than the high alarm occurs.

 If the measured temperature value is higher than the high limit or is lower than

the low limit, the alarm for that the temperature is high or low occurs.

2. The temperature module alarm:

 If the measured value is lower than 34.0℃, the LCD will display “Lo” and the

buzzer sounds “B-B-B-B-B”;

 If the measured value is higher than 43.0℃, the LCD will display “Hi”, and

the buzzer sounds “B-B-B-B-B”;

 If the ambient temperature is lower than 10.0

℃

, the LCD will display “AL”

and the buzzer sounds “B-B-B-B-B”;

 If the ambient temperature is higher than 40.0℃, the LCD will display “AH”

and the buzzer sounds “B-B-B-B-B”;

 The temperature module has a fever alarm function: While the temperature is

higher than 37.5℃, the buzzer sounds “B-B-B”.

Biolight V6 User Manual

Questions and Answers: