Biolight V6 - Safety Information; Monitoring Procedure

Vital Signs Monitor User’s Manual
Chapter 9-2
9.2 Safety Information
Warning
 Please change the earcap after each use to ensure the veracity and avoid
cross infecting.
 At least every half year or one year carries out a temperature measure
calibration, or carries out the calibration according to the hospital
regulation.
9.3 Monitoring Procedure
1. Connect the temperature module to the main unit, press the power button of the
main unit to turn on the monitor.
2. Installs earmuffs to the temperature probe.
While monitoring, please use new clean earmuffs with non-breakage and ensure
that the ear cavity is clean. Please install the earmuffs as follows to ensure the
monitoring accuracy.
The earmuffs installing way:
1) Put the earmuffs paper film into the assistant ring groove.
2) Insert the probe to the end when its center is at the center of the assistant ring.
3) Ensure that the earmuffs on the probe is fixed on.
Refer to the following pictures: