Biolight V6 User Manual

Vital Signs Monitor User’s Manual
15
 SpO
2
Alarm messages
Cause
Level
SpO2 Sensor off
SpO
2
sensor may be disconnected from the
patient or the monitor
Medium
SpO
2
sensor error
SpO
2
sensor failure
Low
SpO
2
signal weak
SpO
2
signal is weak.
 Masimo SpO
2
module
Alarm messages
Cause
Level
SpO2 No cable
No cable connected
Low
SpO2 Replace cable
Cable life expired;
Cable is defective
SpO2 Incompatible cable
Cable is incompatible
SpO2 Unrecognized cable
Cable is unrecognized
SpO2 No sensor
No sensor connected
SpO2 Replace sensor
Sensor life expired;
Sensor is defective
SpO2 Invalid sensor
Sensor is incompatible;
Sensor is unrecognized
SpO2 No tape
No tape
SpO2 Replace tape
Tape life expired
Tape is defective
SpO2 Invalid tape
Tape is incompatible;
Tape is unrecognized
SpO2 Sensor Calibrating
Sensor is calibrating
SpO2 Sensor off
Sensor may be disconnected from patient
SpO2 Pulse search
Searching pulse
SpO2 Interference
Interference detected
SpO2 Low perfusion
Low perfusion index
SpO2 Demo Mode
The monitor is at demo mode
SpO2 Check sensor
Check sensor is connecting
SpO2 Low SIQ
SpO2 Signal IQ is low
SpO2 Low PR SIQ
PR Signal IQ is low
SpO2 Low PI SIQ
PI confidence is low
SpO2 Low SpCO SIQ
SpCO Signal IQ is low
SpO2 Low SpMet SIQ
SpMet Signal IQ is low
SpO2 Low SpHb SIQ
SpHb Signal IQ is low
SpO2 Low SpOC SIQ
SpOC Signal IQ is low

Biolight V6 Specifications

General

Brand	Biolight
Model	V6
Category	Monitor
Language	English