Define (Method, Map, Formula and Curve) | 51
ELx800 Operator’s Manual
Defining MAP
The MAP GENERATION screen allows you to edit or specify the following options
in the assay:
• Automatic or manual map generation
• Mapping direction
• Replication direction
• Blank Map Selection
• Blanking constant
• Number of Blanks
• Location of Blanks
• Number of Standards
• Number of Standard Replicates
• Averaging of Standards
• Concentration and Location of Standards
• Number of Controls
• Control Type Definition
• Number of Control Replicates
• Control Location
• Number of Samples
• Number of Sample Replicates
• Sample Location
Important! The NB reader using 384-well geometry does
not have access to map, formula, or curve options. The
384-well plate type is preset for the map to have 384
samples. This does not include any blanking, controls, or
standards. (Selecting 6-, 12-, 24-, 48-, or 96-well geometries
enables data reduction capabilities.)
To Next Page
