64 | Chapter 3: Operation
BioTek Instruments, Inc.
Control Type
This option allows you to enter the type of control used in the assay. Any
previously defined Control Type will be displayed on the screen.
C O N T R O L # 1 : P C
P C N C H P C * M O R E
C O N T R O L # 1 : P C
L P C CTL1 CTL2 *M O R E
C O N T R O L # 1 : P C
C T L 3 CTL4 *M O R E
• Choose one control identifier for each type of control in your assay. The
available options are:
Positive Control, Negative Control, High Positive
Control, Low Positive Control, CTL1, CTL2, CTL3, CTL4.
• After choosing an identifier for CONTROL# 1, press
ENTER to choose
the identifier for the next control.
Number of Control Replicates
The NUMBER OF CONTROL REPLICATES entry screen is displayed if the
number of control groups is greater than 0.
E N T E R N UMBER
F
R E P L I C A T E S O F P C
0 2
• The well ID associated with CONTROL# 1 appears first. Press
ENTER to
advance to the next control.
• Use the
numeric keys to enter a value for Number of [Control]
Replicates.
• The valid entry range is from 1 to 12 replicates. The software
automatically performs a check to ensure the number of replicates,
multiplied by the number of controls, does not exceed the number of
undefined wells remaining on the plate.
To Next Page
Loading...
