67–
25. PC Software (optional)
This is the software AK 2650 that controls 2650/2652/2658 by RS-232C. All setting can be performed
from PC. Although the 251 points of trace data is displayed on horizontal axis in the screen of the
2650/2652/2658,1001 points of trace data are taken per sweep. When this software is used, all of these
1001 points data are transformed to a PC and trace is displayed at high resolution.
Corresponding OS
Hardware Requirements
Computer that is able to act normally Windows
®
, and able to use the COM port and CD-ROM
drive.
Screen size 1024x768 or more computers.
Operating system
Windows
®
95/98/2000/Me/NT 4.0/XP
Communication method
Bidirectional communication by RS-232C.
Installation procedure
1. Start windows
®
.
2. Insert the AK 2650 software CD into the CD-ROM drive.
The setup will start automatically and the initial screen will appear.
3. Follow the instructions on the screen.
* If the setup does not start,
1. Double-click on the My Computer icon.
2. Double-click on the CD-ROM icon.
3. Double-click on “setup.exe”.
4. Follow the instructions on the screen.
Refer to the “README” in the AK 2650 for details.
* The software can be updated. Please contact to our company for details.
To Next Page
Loading...
