To Next Page

To Previous Page

–

36–

19. Measuring Function<MEAS>

Press to switch over to the function screen shown below:

Select the measuring function:

Ch Power · · · · · · · · · · · · · ·

Adj Ch Pw · · · · · · · · · · · · ·

Occ BW · · · · · · · · · · · · · · · ·

E/F ANT · · · · · · · · · · · · · · ·

M/F PROBE · · · · · · · · · · ·

Freq COUNT · · · · · · · · · ·

* Once you select the measuring function, pressing next time will directly bring up the

function screen for the function you selected the last time. If you want to stop the measuring function,

or if you want to select another measuring function, press [F6] (MEAS OFF). This stops the measuring

function and switches to the above screen, which allows you to select the measuring function.

* The measuring function is stops, when push while these 4 functions (Channel power,

Adjacent channel leakage power, Occupied frequency bandwidth, Frequency counter) are selected.

Because each 4 functions and marker operation cannot be used simultaneously. Similarly, the function

of the marker stops, when the functions of these 4 measurements are selected while using the marker.

* The unit displays data in 251 horizontal dots, but it internally captures the trace and calculates the

measured value (Channel power measurement, Adjacent channel leakage power measurement and

Occupied frequency bandwidth measurement) in 1004 dots.

Ch Adj Occ E/F M/F

Freq

Power Ch Pw BW ANT PROBE

COUNT

MEA

Channel power measurement

Adjacent channel leakage power measurement

Occupied frequency bandwidth measurement

Electric field strength measurement

Magnetic field strength measurement (optional)

Frequency counter (factory option)

MEAS

F1 F2 F3

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com

BK Precision 2650 User Manual

Questions and Answers: