–II–
· Guarantee of quality
Guarantee period
Guarantees that it will repair any failure free of charge if it occurs because of our responsibility within
one year after delivery. However, the above guarantee does not apply to such a failure that:
1) is caused by a fire, natural disasters, etc.
2) is caused by inappropriate handling of the unit, such as dropping it while moving it after
purchasing.
3) is caused by handling counter to the instructions or precautions listed in the operating manual.
4) is caused by modifying the unit or by being considered to be your responsibility because of
inappropriate use.
We will not be responsible for direct or indirect damage caused by use of this product or by a failure of
this product.
Warm-up time
In order to stabilize the electric performance at the time of turning on the unit, please perform
warming-up for at least 10 minutes.
The LCD may flicker on conditions of the low temperature and the dark backlight.
In that case, adjust the LCD backlight control BLCTR to be bright.
However, do not be bright too much in order to keep battery operation time longer.
Precautions for storage
1) Strictly observe the storage conditions specified for this unit, such as avoiding direct sunlight and dust.
2) Store this unit in a place where -20°C to 60°C, less than 60°C/70%RH, variations in temperature and
humidity are small.
After service
If you have any question about the contents of this product or how to operate it, please contact us at:
B&K Precision Corporation
22820 Savi Ranch Parkway – Yorba Linda, CA92887
TEL. 714-921-9095 FAX. 714-921-6422
URL: http://www.bkprecision.com/ E-mail: sales@bkprecision.com
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
