2–
9) High resolution display on the PC screen
The trace is displayed at high resolution, 1001 points in the horizontal axis, on the PC screen when “PC
Software AK 2650” (optional) is used.
1.2 Standard accessories
1. AC adaptor BC 2650
2. Soft carrying case LC 2650
3. Accessory pouch
4. Fuse (It has been installed in the inside)
5. Operating manual
6. Ni-MH Battery BP 2650 (Refer to “6.4 Installing the battery” for details.)
1.3 Optional accessories
1. Antenna AN301, AN302, AN303, AN304, AN305, AN306
(Refer to “19.4 Electric field strength measurement” for details.)
2. Magnetic field probe PR 26M with a dedicated double shielded coaxial cable
(Refer to “19.5 Magnetic field strength measurement” for details.)
3. PC software AK 2650 including RS232 cable (Refer to “25. PC Software” for details.)
4. Printer PT 2650 with AC adaptor. 4pcs of AA batteries, a roll paper (Refer to “22. Printing” for
details.)
5. Roll paper PX 2650 for PT 2650 printer (with 10 rolls)
6. SMA coaxial cables (order accessory kit CC265)
Connector Cable length Frequency range
SMA(P)/SMA(P) 0.5m DC to 10GHz
SMA(P)/SMA(P) 1.0m DC to 10GHz
SMA(P)/SMA(P) 1.5m DC to 10GHz
SMA(P)/N(J) 0.2m DC to 4GHz
SMA(P)/N(P) 0.2m DC to 4GHz
SMA(P)/BNC(J) 0.2m DC to 2GHz
SMA(P)/BNC(P) 0.2m DC to 2GHz
* Impedance is 50Ω.
* Performances change by bending and deteriorate by repeating the insertion and extraction
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
