Black Box KV1700A/E - Page 69

CHAPTER 4: OPERATIONS
67
NOTE:
The Scroll Lock LED blinks if the mode is enabled.
Table shows the translations for a PS/2 keyboard to a Sun server. All mapped functions
will only be valid when the Scroll Lock mode is enabled.
Using the Power/Sleep key
Table shows the Power/Sleep key on USB servers for Sun and PS/2 keyboards. Sun
keyboards have a Power key used to power the workstation. Some PS/2 keyboards have a
Sleep key to place the server in a stand-by or power saving mode
.
To issue the Power/Sleep command:
Enable the Scroll Lock mode and press F11 (or the Sleep key) on a PS/2 keyboard.
-or-
For a Sun server, press the Power key.
PS/2 Keyboard to Sun Server
Key Sun Key Sun
F1 Stop F9 Find
F2 Again F10 Cut
F3 Props F11 Power
F4 Undo F12 Command
F5 Front keypad * Compose
F6 Copy NUMLOCK Help
F7 Open keyboard / Mute
F8 Paste keyboard - Vol -
F8 Paste keyboard + Vol +
Power/Sleep for USB Servers
Keyboard Peripheral Key Scroll Lock Mode Server
PS/2 Shift - F11 Enabled Win 98/2000
F11 Enabled Win 98/Mac
Sleep Enabled Win 98/Mac
Sun Power Enabled Win 98/2000
Power Enabled Win 98/Mac