SERVSWITCH™ OCTET INSTALLER/USER GUIDE
88
Load the AMX-MIB file into your SNMP browser to start monitoring and managing Octet
switch-specific objects. Once you have enabled the sending of traps on the Octet switch,
these traps can be interpreted by the SNMP trap listener by using the trap-specific MIB
files. The following table describes the MIB files required for the SNMP processing.
Exit
This menu selection will return you to the ready prompt.
Octet System MIB Trap Files
Trap File Purpose
AMX-MIB
Used by the SNMP Browser/Manager to monitor/manage
the Octet switch
AMX5000-TRAP-MIB SNMP traps for the KV1701A/E switch
AMX5010-TRAP-MIB SNMP traps for the KV1702A/E switch
AMX5020-TRAP-MIB SNMP traps for the KV1700A/E switch
AMX5030-TRAP-MIB SNMP traps for the KV1703A/E switch
To Next Page
Loading...
