Boeing ForeFlight Sentry - Powering the Sentry Mini; Sentry Mini LED Status

SENTRY MINI
Powering Sentry Mini
Sentry Mini is not equipped with an internal battery. To power Sentry
Mini, plug the provided USB-C cable into a portable or aircraft 5V
(volt) 2A (amp) power source.
When Sentry Mini is powered on, the GPS and ADS-B LEDs
illuminate and Sentry Mini creates a wireless network.
LED Status
Sentry Mini has two LEDs. The ADS-B and GPS LEDs are activated when Sentry Mini is
powered on and will display red, yellow, or green as ADS-B and GPS reception change.
Sentry Pilot’s Guide 15
Sentry Mini USB-C
Cable (included)
NOTE: Any data received from an ADS-B tower (including tower information) is considered
reception. A yellow or green ADS-B LED does not guarantee reception of FIS-B data.