OLED Views
The Sentry Plus OLED display contains four views. Each view displays real-time information.
The Sentry Plus log indicates Sentry Plus is connected to ForeFlight. Press the power button
to cycle between the available views.
•
Acceleration depicts real-time accelerometer data. Acceleration is measured on the
pitch axis. While straight and level, the acceleration view indicates 1.0g.
•
CO Status depicts carbon monoxide concentration. Elevated levels of CO are depicted
as Caution or Danger. If Caution or Danger is displayed on the OLED screen, the
concentration level (ppm) is displayed in a ForeFlight Mobile alert.
•
Speed depicts ground speed in knots. If a groundspeed of seven knots or less is
detected, Sentry Plus displays Speed (kts) < 7.
•
Accuracy depicts the accuracy of the Sentry Plus integrated WAAS GPS. Accuracy is
determined by the Sentry Plus GPS processor.
To Next Page
Loading...
