Special features lower manual split
The factory SONGS/Global presets are designed so, that there is usually always a split point in the lower
manual.
"Ex factory" this split point is located at the key
g
'
of the sub manual (= lowest key of the right
playing area). This is the standard split point
that applies globally to all factory SONG
presets (exception: the church and theatre
organ SONGs/Presets).
Thus the accompaniment can be played in the left area of the lower manual, while alternative sounds
are available in the right area for the melody or for interludes, additional melody lines, etc. (exceptions
are e.g. the sacral presets, because the church organ does not have a manual split).
This global split point in the lower manual can also be defined by you. This allows you, for example, to
adapt it to your personal playing style, depending on whether you prefer to play the accompaniment
in the lowest octave of the lower manual to have a larger right range for the right hand, or whether
you prefer to play the accompaniment in the middle octave with a correspondingly larger left range.
Even the octavation of the left parts, if necessary, when the accompaniment is played "down", is
performed automatically by the SEMPRA depending on the set split point:
If you enter a split point below g', the lower-left parts are automatically played one octave higher.
This global definition of the sub-manual split point is very convenient for most players, because every
player can define his desired split point in one step and does not have to adjust all songs/global presets
individually.
But of course, SEMPRA also allows this: Later you will learn how you can save the lower manual split
into individual SONGS/global presets if required and how you can play particularly comfortably with
changing split points in the lower manual.
To Next Page
Loading...
