3.4) Assistant Workers
If the field engineer has to execute work that requires the presence of
a second person, this can be the lift attendant or any other instructed
person .
3.5) Short Circuiting of Control Lines and Switches
It is prohibited to short circuit control lines and switches during the
course of maintenance and inspection work. If repair work cannot be
done without short circuiting control lines and switches, the bridge
has to be laid with utmost care. Immediately after having completed
the repair work, the bridge has to be removed again .
3.6) Switch Declaration
Temporary or verbal switching declarations are prohibited .
3.7) Work with Live Electric Components
Work with live electric components, if necessary at all, is to be
executed by using isolated tools only and a substratum and appropri-
ate personal safety equipment. The pertinent instructions of the
safety regulations DIN EN 50110 part 1 and part 2 / DIN VDE 0105
part 100 "Betrieb von elektrischen Anlagen" (how to operate electric
appliances) are to be adhered to.
3.8) lift Operation
Up to completion of the installation work, the field engineer must not
operate the lift unless it is necessary.
3.9) Staying on Top of the Car
While travelling on the car roof switch the inspection switch on, if
available. It is after that only that the landing door may be closed. If
there is no inspection switch, an instructed assistant worker has to
operate the car.
Persons staying on the car roof are allowed to enter a command
and/or switch pulse for moving the car only if all persons present
there have moved back behind the outlines of the car. It is prohibited
to continue working during travelling .
Only those persons required for executing the work may remain on
the car roof .
10 Installation Manual System »bp308« – Safety Information
To Next Page
Loading...