8.11.4 Travel Speeds
Travel speeds are set in the service menu under SETTINGS >
FUNCTIONS → DRIVE UNIT. Abbreviations of different speed desig-
nations:
VN = Re-levelling speed
VI = Inspection speed
VR = Emergency speed
V0 = Levelling speed
V1..V7 Intermediate and fast speeds, depending on the selected
drive type.
The braking and minimum distances can be re-calculated when chan-
ging the travel speed. These have to be adjusted, if necessary.
INFO!
V0 < V1 < V2 < V3 < V4 < V5 < V6 < V7!
100 Installation Manual System »bp308« – Commissioning Instructions
To Next Page
Loading...