2 Safety Information
Prior to installing and commissioning this unit carefully read the
safety instructions and warnings and pay attention to every warning
label attached to the unit. Make sure that the warning labels are read-
able at all times and replace missing or damaged labels.
2.1 Qualified Personnel
Qualified personnel in the sense of the documentation respective of
the warnings on the appliances themselves are persons, who are
familiar with the erection, installation, commissioning, operation and
maintenance of the appliances and dispose of qualifications that are
appropriate with the work, such as for example:
Apprenticeship and skill and/or authorisation to switch, earth and
label power circuits and appliances in accordance with the stand-
ards and safety techniques.
Apprenticeship and skill in the maintenance and operation of the
appropriate safety devices according to the standards.
First aid training.
2.2 Safety Instructions Concerning Control Units
CAUTION!
Excerpt from the "Merkblatt über Sicherheitsmaßnahmen bei der
Montage und Instandsetzung von Aufzugsanlagen" (ZH 1/312; Issue:
10/1983) (memorandum on safety measures to be taken while
assembling and maintaining lifts) issued by "Hauptverband der gew-
erblichen Berufsgenossenschaften" (association of industrial trade
cooperatives):
3.1) Notification
If a field engineer has to work alone on an lift system, he has to notify
the lift attendant or any other person in the building (e.g. janitor,
inhabitant) of his presence.
3.2) Blocking the lift System
Prior to starting work on the lift system block it for normal operation.
At every landing door apply a label saying: "lift out of operation".
Open well accesses are to be blocked in a way that unauthorized
persons cannot gain access to them
3.3) Landing Controls
Prior to starting work switch off the landing controls.
9
To Next Page
Loading...