2.3 Assembling and Operating Requirements
ATTENTION!
• The control system »bp308« has been manufactured in line with
the latest technology and is safe to operate. Risks only occur if
unauthorized persons use the equipment inappropriately and not
for its intended purpose.
• Error-free and safe operation of the devices is subject to appropri-
ate transport, storage, erection and installation as well as to careful
operation and maintenance.
• Refrain from any taking any action that might infringe the safe
functioning of the equipment.
• Unauthorised reconstruction and changes might infringe the safe
functioning of the equipment and are prohibited.
• During operation, the drive components are partly exposed to high
voltages and contain moving or rotating parts. They may therefore
cause severe injuries to persons or material damages in cases of
unauthorized removal of necessary covers or insufficient mainten-
ance.
• Only qualified personnel may be appointed to work on the equip-
ment. Personnel must keep this installation manual and all product
documentation handy at all times when working on the equipment
and must consistently adhere to it.
• The operator must ensure that the drive unit is secured in case of
equipment breakdown, as otherwise persons may be injured or
material damaged.
CAUTION!
Prior to any work on the equipment, switch off the mains supply and
check that the equipment is free of any residual voltage.
11
To Next Page
Loading...