1.2 Purpose
The "bp308" control system is an equipment applied for lifts.
1.3 Documentation
This manual does not provide information on our full range of delivery
options. All information exclusively serves as a product description
and is not to be interpreted as a guaranteed characteristic within a
legal sense. Any potential damage claims against our company − for
whatever legal reason − are excluded unless we have committed an
act of wilful intent or gross negligence. We do not warrant the stated
circuits or processes to not be subject to third-party industrial prop-
erty rights. This manual may only be reprinted − in whole or part −
with the prior consent of BÖHNKE + PARTNER GmbH and subject to
proper acknowledgements .
© BÖHNKE + PARTNER GmbH Member of the Schmersal Group
® Both logo and company name are registered trademarks.
The information contained in this manual is checked regularly.
Necessary corrections are contained in subsequent issues.
Warnings as well as special information in this technical manual
are marked as follows and highlighted by the corresponding symbols.
ATTENTION!
This mark is used to point out that inaccurate observance or non-ob-
servance of the instructions or procedures may result in damages to
the equipment, in injuries or fatal accidents.
CAUTION!
This warning is set if inaccurate observance or non-observance of
the instructions or procedures may lead to injuries or fatal accidents
by electric current.
INFO!
This highlight is used to point to special information.
8 Installation Manual System »bp308« – General Information
To Next Page
Loading...