Böhnke + Partner bp308 - Easy Service - Thanks to Clear Layout Assembly; Control Cabinet with Bp308 Unit

• Dimensions:
800 x 800 x 300 mm standard
800 x 1000 x 300 mm (thyristor-control)
1000 x 1200 x 300 mm FRQ (integrated frequency inverter)
• Mounted on rubber-bonded metal buffers (optional)
5.7.14 Easy Service - thanks to clear Layout
Assembly
The cables are installed on the base plate according to industrial
standard. Incoming lines can be laid in the cable duct. All processor
terminals are connected to a separate terminal strip arranged at the
bottom of the control cabinet. The control components are arranged
on a zinc-plated installation plate. The dimensions stated refer to a
standard configuration of lift systems with eight or more landing call
stations and with a main drive power of max. 15 kW. Systems with a
higher power can be supplied on demand .
5.7.15 Control Cabinet with bp308 unit
Control cabinet:
Structured paint RAL 7032 (grey)
Installation plate with cable duct
Protection class IP 54, with optional air filters
Main contactors on rubber-bonded-to-metal buffers (optional)
Dimensions: 800 x 800 x 210 mm
Door lock: triangular grater
Wall-mounted
Bottom cable inlet
Main Voltage
3 x 230 bis 500 V AC 50 Hz N PE
Safety circuit
230 V AC
Main Power supply (integrated)
Output 50 VA
Control voltage 24 V DC / 2,2 A
Electronics voltage 5 V DC
Rectifier
Brake (rope traction) 180 V DC / 4 A
Lock (optional) 180 V DC / 4 A
39