Böhnke + Partner bp308 - Page 138

| | | | - DCP logging
| | | | - APS logging
| | | | - Energy meter (UMG)
| | | | - GDB
| | | | - SAP
| | | | - SLP
| | | | - AWG-05 (RS-485)
| | | | - USV (Effekta)
| | | | - LIN bus master
| | | | * Baud rate
| | | | - 1200 Bit/s
| | | | - 2400 Bit/s
| | | | - 4800 Bit/s
| | | | - 9600 Bit/s
| | | | - 19200 Bit/s
| | | | - 38400 Bit/s
| | | | - 57600 Bit/s
| | | | - 115200 Bit/s [Default]
| | | | * Parity
| | | | - none [Default]
| | | | - odd
| | | | - even
| | | | * Modem device
| | | | - Analog modem
| | | | - ISDN
| | | | - GSM
| | | | - FirePlug (Bluetooth)
| | | | - EA-GSM Modem (Leitronic)
| | | | - EA-GSM Internet (Leitronic)
| | | | - GPRS/UMTS
| | | | * Faults on service
| | | | - off [Default]
| | | | - on
| | | | * Legacy Mode
| | | | - on [Default]
| | | | - off
| | | | * Parking trip after setting the parking floor via EIS-300
| | | | - off [Default]
| | | | - on
| | | | * Callback server usage (Internet)
| | | | - off [Default]
| | | | - on
| | | | * Access Point Name (APN)
| | | | * IP Callback server
| | | | * Host name Callback server
| | | | * Port Callback server (Call Acceptance)
| | | | 1..65535 [9001]
| | | | * Access password callback server
| | | |
| | | +- Serial interface 3
| | | | * Function
| | | | - RDT-300
| | | | - EIS-300
| | | | - DCP (RS-485) [Default]
| | | | - DCP logging
| | | | - APS logging
| | | | - Energy meter (UMG)
| | | | - GDB
| | | | - SAP
| | | | - SLP
| | | | - AWG-05 (RS-485)
| | | | - USV (Effekta)
| | | | - LIN bus master
| | | | * Baud rate
| | | | - 1200 Bit/s
| | | | - 2400 Bit/s
| | | | - 4800 Bit/s
| | | | - 9600 Bit/s
| | | | - 19200 Bit/s
| | | | - 38400 Bit/s [Default]
| | | | - 57600 Bit/s
| | | | - 115200 Bit/s
| | | |
| | | +- Serial interface 4
| | | * Function
| | | - RDT-300
| | | - EIS-300
| | | - DCP (RS-485)
| | | - DCP logging
| | | - APS logging
140