EasyManua.ls Logo

Böhnke + Partner bp308 - Summary of the Functions of bp308

Böhnke + Partner bp308
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operator guidance using 7 keys and illuminated graphic LC display
Parameter setting on site using the LCD, mobile phone, Bluetooth
or laptop
Parameters safely memorised in EEPROM (2 complete data sets)
Real-time clock integrated
Setup menu separate from service menu
Code lock can be set separately
Menus provided in German, English, Dutch, and Swedish
Integrated interfaces for DCP, LAN, USB and CANopen
Optional remote diagnostics via modem (USB) or LAN
Different codes possible for landing signals and direction indicator
(Gray, binary, user-specific)
Zero load, full load and actual load in kg
Direction indicator, landing gong, selecting landing door as well as
direction of travel
Home landing adjustable
Fire emergency landing and emergency power landing adjustable
Monitoring and waiting landing adjustable
Fire brigade landing adjustable
Parking programs adjustable by LCD
Door tables A, B and C externally switchable
Magnet switch selector with 4 and 6 switches
Absolute encoding selector with AWG-05 executed in CANopen
Next landing and short landing distance up to 15 mm (with absolute
encoding only)
Selective landing calls for door sides A, B and C
Priority landing calls with two stages (low and high position )
Door selection for sides A, B and C (all door operators)
Doors adjustable to different times and functions
Zone module (SMZ04) for doors starting to open during landing
approach and for re-levelling)
Door locks on side A, B or C separately selectable by lockage con-
trol
Service intervals settable in relation to travels, hours and date
Malfunction stack memory of up to 128 messages (type of malfunc-
tion, landing and time (date and hour) as well as signal map)
Malfunction list (type, landing and frequency)
Batch memory of up to 128 important messages
Monitoring possible with laptop on site
Remote fault diagnostics possible with WinMOS
®
300 via modem or
LAN
2 relays, freely programmable with one normally closed contact
2 relays, freely programmable with one normally open contact
4 relays, freely programmable with one double throw contact for,
e.g., door A and door B for electronic door control units
23

Table of Contents