Bosch AMAX 4000 - Page 107

DC09 acct1 0383 – 0398 000003
000000
0000
DC09 acct2 length 0399 – 0400 06
DC09 acct2 0401 – 0416 000003
000000
0000
DC09 Lpref 0424 – 0429 000000
DC09 Rrcvr enable 0417 0
DC09 Rrcvr 0418 – 0423 000001
4 Transmission format for receiver 0113 1
Telephone number / IP address and port 0090 – 0106 15
Subscriber ID number 0107 – 0112 000000
Anti-replay for receiver 0114 1
EN=1
Acknowledge wait time for receiver 0115 – 0116 05
Network polling time for receiver 0117 – 0119 001
DC09 data format 0500 1
DC09 acct1 length 0501 – 0502 06
DC09 acct1 0503 – 0518 000004
000000
0000
DC09 acct2 length 0519 – 0520 06
DC09 acct2 0521 – 0536 000004
000000
0000
DC09 Lpref 0544 – 0549 000000
DC09 Rrcvr enable 0537 0
DC09 Rrcvr 0538 – 0543 000001
Notice!
Enter a telephone number when the Contact ID or SIA is selected. Enter an IP address and
port number when the Conettix IP is selected. Anti-replay for receiver, acknowledge wait time
for receiver, and network polling time for receiver are valid only when Conettix IP is used.
How to set a telephone number:
For telephone number programming, refer to How to Program Telephone Numbers, page 110.
AMAX 2100 / 3000 / 4000 Address Programming | en 107
Bosch Sicherheitsysteme GmbH Installation Guide 2014.11 | 02 | F.01U.267.112