Bosch AMAX 4000 - Communication Operations Programming

Automatic report time: minute
00 - 99 = 0 - 99 minutes, others = do not use real-time
report
0132 – 0133 99
Automatic report expiry time
000 – 999 = 000 – 999 minutes
0134 – 0136 000
AC Fault Domestic No.
Option Address Default
AC fault domestic no. (0 = no report,
1 = destination 1,
2 = destination 2,
3 = destination 3,
4 = destination 4,
5 = destination 1, 2, 3 and 4,
6 = destination 1 (2, 3, 4 for backup),
7 = destination 1, 3 (2, 4 for backup))
0137 0
AC Fault Report by Receiver
Option
Address Default
AC fault report by receiver (0 – 7) 0138 6
System Status Report by Domestic
Option
Address Default
System status report by domestic (0 = no report,
1 = destination 1,
2 = destination 2,
3 = destination 3,
4 = destination 4,
5 = destination 1, 2, 3 and 4,
6 = destination 1 (2, 3, 4 for backup),
7 = destination 1, 3 (2, 4 for backup))
0139 0
Communication Operations Programming
Dual IP Settings
Option Address Default
Dual IP Settings (0 = 1 IP module, 1 = 2 IP modules) 0990 1
Notice!
Dual IP settings are valid only when used in the Conettix IP format. This programming option
is valid for B426 and ITS-DX4020-G modules. ITS-DX4020-G cannot be set as No. 2 IP module.
9.1.3
AMAX 2100 / 3000 / 4000 Address Programming | en 109
Bosch Sicherheitsysteme GmbH Installation Guide 2014.11 | 02 | F.01U.267.112