Bosch AMAX 4000 - Page 110

Module Address
ITS-DX4020-G module or B426- module 1 0134
B426 module 2 0250
Remote Access to Panel when Panel Is Armed
Option Address Default
Remote access to panel when panel is armed (0 =
disabled, 1 = enabled)
0929 1
Remote PC Setting
Option
Address Default
Remote PC IP address 0930 – 0941 15
Remote PC port number 0942 – 0946 15
AMAX panel DHCP update time (hours) 0947 15
Remote Programming (0 = disabled, 1 = enabled) 0970 1
Call Back Setting
Option
Address Default
Call back setting (0 = disabled, 1 = enabled) 0972 0
Call back telephone number (see How to Program
Telephone Numbers, page 110)
0974 – 0989 15
Domestic Telephone Number
Option
Address Default
Domestic telephone number 1 1496 – 1511 15
Domestic telephone number 2 1512 – 1527 15
Domestic telephone number 3 1528 – 1543 15
Domestic telephone number 4 1544 – 1559 15
See How to Program Telephone Numbers, page 110.
If the default value15 is set as the first digits of the telephone number, the domestic
telephone alarm function is disabled. If set to other positions, it marks the end of the
telephone number.
How to Program Telephone Numbers
Telephone number
required
Programming input
key
Telephone number
required
Programming input
key
0 0 7 7
1 1 8 8
110 en | Address Programming AMAX 2100 / 3000 / 4000
2014.11 | 02 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH