Bosch AMAX 4000 - Page 72

15 All Faults
16 Fire Alarm 0 = Any area
1 – 16 = areas 1 – 16*
17 Fire Reset
18 AWAY Armed 0 = All areas
1 – 16 = areas 1 – 16*
19 STAY Armed
20 Reset 0 = Any area
1 – 16 = areas 1 – 16*
21 Follow Zone Event Zone Number Zone number 1 – 64*
22 RF Keyfob Button 3 (e.g. garage
door)
0 = Any area
1 – 16 = areas 1 – 16*
23 RF Keyfob Button 4 (e.g. light)
24 Chime Indication
25 Verified Alarm
26 Unverified Alarm
27 Technical Alarm
28 Bypassed Zone
29 Ready to Arm 0 = All areas 1 – 16 = Areas 1 – 16*
30 Walk Test Output Mode
31 24h Alarm 0 = Any area
1 – 16 = areas 1 – 16
32 24h Panic Alarm
33 Medical Alarm
34 RF Power Fault 0 = Any repeater
35 Follow Zone 0 = Any area
1 – 16 = areas 1 – 16
36 Schedule
Table 7.4: The value ranges of output event options
* AMAX 2100 areas 1 - 2 zones 1 - 8
AMAX 3000 areas 1 - 8 zones 1 - 32
AMAX 4000 areas 1 - 16 zones 1 - 64
Output Events – Detailed description
00 - Not Used
01 – System Disarmed
The output is operated in the following cases:
– The system is disarmed after a system reset.
– The system operated the disarm command.
The output is reset in the following cases:
72
en | Settings AMAX 2100 / 3000 / 4000
2014.11 | 02 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH