Bosch C 80 - Page 47

CAN Configuration | 10
Bosch Motorsport Manual_C_80 47/144
g) Check the box to automatically adjust the limits of the channel.
CAN analyzer functionality
This functionality is only available, if a MSA-Box (I or II) is used to connect the C 80 to the
PC. Choose the CAN bus that is connected to the MSA-Box to display the raw value and
the converted physical value here.
Automatic creation of online measurement sheets
The CAN channel can be automatically inserted into a measurement sheet. Insert a name
for a new sheet or select an existing sheet from the list box.
For an online view of the value measured by the C 80, insert the channel in an online
measurement sheet which is described in the chapter Setting up an online measurement
[}75].
10.2.4 Online view of CAN channels in vehicle
1. Double-click on ‘Sheet 1’ in Project Tree. Measurement Sheet 1 is displayed in Main
Area.
2. Click on ‘Measurement elements’ in the Toolbox.
3. Drag the desired Measurement element (e.g. Numeric Indicator) and drop it on the
Measurement Sheet.