Bosch C 80 User Manual

Telemetry System LTE 65 | 15
Bosch Motorsport Manual_C_80 99/144
Under the ‘Telemetry’ tab, the first section requests a folder path for the DCP- Config-
uration files. This is the folder path where RaceCon stored the *.ini files required by
WDServer.
9. Click on the “Change” button next to this section and navigate to this folder.
A template can also be specified for the file nomenclature for logged telemetry as
well as a save location.
– To ensure proper communication between WDServer and the receiver, do not delete
any old *.ini files from this folder path. As mentioned in section 5, RaceCon will gener-
ate a new *.ini file each time a project is synchronized; each new *.ini file instance has

Bosch C 80 Specifications

General

Resolution	16 bit
Interfaces	USB
Measurement Range	±10V
Accuracy	±0.1 % FS
Channels	8 universal analog inputs (±10 V, ±20 mA, Pt100, Pt1000, Thermocouples type K, S, J, T, N, R, B, E), 4 digital inputs (trigger, counter, frequency), 2 digital outputs (24 V / 500 mA)