Bosch FPA-5000 Networking Guide

Modular fire panel Remote Services | en 29
Bosch Sicherheitssysteme GmbH Networking guide 07.2019 | 5.9 | F.01U.247.450
7.8 Connect Ethernet and CAN network with redundant panels
Figure7.8: Connect Ethernet and CAN network with redundant panels
For ranges greater than 100 m the range extension with media converters is mandatory. For
ranges less than 100 m the media converters might not be required.
7.9 Connect remote services to redundant panels
1 2 1 2 1
Figure7.9: Left side: in Ethernet network Right side: in CAN network
For ranges greater than 100 m the range extension with media converters is mandatory. For
ranges less than 100 m the media converters might not be required.
8 Remote Services
The following services belong to Remote Services:
– Remote Connect
– Remote Alert
– Remote Maintenance
Prerequisite for Remote Alert and Remote Maintenance is Remote Connect.

Bosch FPA-5000 Specifications

General

Max Number of Detectors per Loop	254
Display	LCD
Network Capability	Yes
Power Supply	24 V DC
Operating Temperature	-5°C to +50°C
Communication Ports	Ethernet
Humidity Range	95% non-condensing