Boss BR-600 - Copying Drum Sounds from Other Drum Kits

140
Changing the Drum Sound (Drum Kits)
Rev0.10
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR[ ][ ]to move the cursor to
“TONE,” and press [ENTER].
fig.04-150
3
Press CURSOR [ ] [ ] to move the cursor to
“COPY,” and press [ENTER].
fig.04-160
4
Turn the TIME/VALUE dial to specify the copy-
destination drum kit, then press [ENTER].
P1 – 9 : Preset Drum Kit 1 – 9
S1 – 5 : Song Drum Kit 1 – 5
fig.04-170
5
Turn the TIME/VALUE dial to specify the copy-
destination drum sound, then press [ENTER].
* Select “ALL” if you want to copy all of the drum sounds in
the kit.
fig.04-180
6
Turn the TIME/VALUE dial to specify the copy-
destination drum kit, then press [ENTER].
fig.04-190
7
Turn the TIME/VALUE dial to select the copy-
destination song drum sound, then press [ENTER].
Copying is executed.
To cancel, press [EXIT].
fig.04-200
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
8
Press [EXIT] to return to the Play screen.
Copying drum sounds from
other drum kits