150
Creating Original Patterns
11
If you mistakenly input the wrong drum sound,
delete that sound.
You can use the following procedure to delete drum
sounds.
Move the cursor to the position of the drum sound you
want to delete, then carry out the following.
•
Rotate the TIME/VALUE dial completely to the right.
• Press [ENTER].
• Switch the display to indicate the drum sound you
want to delete, then hold down [DELETE/MUTE]
and press the drum pad for the drum sound to be
deleted.
12
Readjust the tempo and/or Quantize settings as necessary.
13
Repeat Steps 7 – 12 as needed, or press [STOP] to stop
the process.
14
When you have finished inputting the data, press [EXIT].
* You can press [STOP] instead.
15
Press [EXIT] repeatedly until the Play screen returns
to the display.
* “Keep Power On!” appears in the display, and the input
patterns are saved.
To Next Page
Loading...
