EasyManua.ls Logo

Boss BR-600 - Page 19

Boss BR-600
228 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Panel Descriptions
Rev0.10
REC/PLAY section
AUTO PUNCH
This button is used to make settings for the automatic
punch in/out function.
[ON/OFF]
This turns the auto punch-in/out function on/off. When
this is on, the button will light.
“Specifying the area for auto punching in/out”
(p. 61)
[IN]
For setting the auto punch-in location. Press this button to set
the punch-in point. When set, the button will light. After the
punch-in location is set, you can press this button to
automatically move to the punch-in location.
* Press this button while holding down [ON/OFF] to clear the
set punch-in location.
“Erasing a registered auto punch in/out
location” (p. 62)
[OUT]
For setting the auto punch-out location. Press this button to
set the punch-out location at the current location in the
track. When set, the button will light. After the punch-out
location is set, you can press this button to automatically
move to the punch-out location.
* Press this button while holding down [ON/OFF] to clear the
set punch-out location.
“Erasing a registered auto punch in/out
location” (p. 62)
[LOCATOR]
Use this button to store any location that you desire. Then, by
pressing this button, you can automatically move to that location.
When a location is set, the button will light and you will jump to
the location each time this button is pressed.
* Press this button while holding down AUTO PUNCH [ON/
OFF] to clear the set location.
“Registering Time (Locator)” (p. 72)
[ZERO]
Moves you to the time location 00:00:00-00.0.
“Moving the current position” (p. 33)
[REW]
The song will rewind while you hold down the button.
“Moving the current position” (p. 33)
[FF]
The song will fast-forward while you hold down the button.
“Moving the current position” (p. 33)
[REPEAT]
You can specify a region that you wish to hear, and hear it
repeatedly
This is convenient for making recordings involving repeated punch-
ins and punch-outs(p. 60) and for practicing and copying phrases.
“Repeating Playback (Repeat)” (p. 58)
[STOP]
Stops recording or playback of the song.
“Recording Operations” (p. 57)
[PLAY]
Plays back songs. When [REC] is pressed and flashing,
press [PLAY] to start recording. During recording or
playback, the indicator on the button lights in green.
“Listening to a Demo Song” (p. 32)
“Recording Operations” (p. 57)
[REC (Recording)]
This is the Recording button. In addition to the Recording
operation, it is also used for manual punch-in/out. While in
recording standby, the button flashes in red, and during
recording, it lights in red.
“Recording Operations” (p. 57)
“Manually Punching In/Out” (p. 60)
5

Table of Contents

Other manuals for Boss BR-600

Related product manuals