Brainlab KOLIBRI - Turning on System

34 System User Guide Rev. 2.5 Kolibri Ver. 2.0
Turning System On/Off
3.4.2 Turning On System
How to Turn On
Power Supply
Operate system using the power source indicated on type plate. If you are unsure of
type of power available, consult Brainlab support or your local power company. Using
the wrong power source could permanently damage system, rendering it inoperable.
Check voltage setting before plugging power cable into wall outlet.
Only operate the system using the power cable provided with the system.
Waiting Period
If system has been turned off, wait at least 60 seconds before turning it on again. Oth-
erwise, high input current may trip the circuit breaker.
Steps
1. Ensure that all cables have been connected.
2. Remove all USB flash drives.
Otherwise, software cannot recognize patient data.
3. Connect power inlet s to an appropriate power supply using power cable.
4. Press power switch a.
5. Press On/Off button d briefly.
Power LED
f indicates that system is running and under electrical power.
6. Wait for system to boot.
Once operating system has been initialized, the startup screen opens.
7. Follow instructions in the Software User Guide.