78 System User Guide Rev. 2.5 Kolibri Ver. 2.0
Camera
5.4.7 Camera Protection Cover
Purpose
To avoid damaging the camera, place camera protection cover on camera before mov-
ing, transporting or storing camera stand.
Before you Begin
Do not cover camera with protection cover when system is running. Camera may over-
heat and could be seriously damaged.
Ensure that system has been turned off for at least 5 minutes.
Disconnect camera from
Kolibri
workstation.
How to Protect
Kolibri Camera
Figure 39
Steps
1. Ensure that camera stand is in parking position.
2. Pull camera protection cover
a over
Kolibri Camera
.
3. Ensure that camera protection cover sits properly on camera.
To Next Page
Loading...
