90 System User Guide Rev. 2.5 Kolibri Ver. 2.0
Dismantling & Assembling
How to Attach
Make sure that the camera interface is open before attaching the camera.
To prevent the camera from falling, ensure that the spring lock has locked completely.
Steps
1. Ensure that camera stand is in park position.
2. Push safety lever
d back to open camera interface lever f.
As the camera interface has a spring lock, you can only mount the camera if the camera
interface is opened.
3. Place camera a into camera interface s so that spring lock automatically closes.
4. Ensure that camera interface spring lock is properly closed and camera is securely
attached.
To Next Page
Loading...
