Brocade Communications Systems DCX 8510-8 User Manual

About This Document
• Supported hardware and software..............................................................................................................................................................13
• What’s new in this document........................................................................................................................................................................13
Supported hardware and software
This document includes information specic to the Brocade DCX 8510-8 running Brocade Fabric OS version 7.4.0 and later.
What’s new in this document
The following changes have been made:
• Modied "Qualied transceivers for the FC16-64 and CR16-x blades" table in Qualied transceivers for the FC16-64 and
CR16-x blades on page 66 to add support for 57-1000294 transceivers for both FC16-64 and CR16-x blades.
• Corrected all instances where QSFPs for FC16-64 are noted as not compatible with core blades, as both blades can now use
the same 100 m OM4 QSFP transceiver.
• Corrected connector description for female-to-female patch cable to key-up/key-up in Using Brocade 2 km LWL QSFPs on
page 51.
Brocade DCX 8510-8 Backbone Hardware Installation Guide
53-1002180-15 13

Brocade Communications Systems DCX 8510-8 Specifications

General

Brand	Brocade Communications Systems
Model	DCX 8510-8
Category	Switch
Language	English