Brocade Communications Systems DCX 8510-8 User Manual

2. Back up the current conguration.
NOTE
If you are using the Virtual Fabric feature, you should run congupload -vf before running the congupload command
to save the logical switch conguration.
• Enter congUpload -all; then enter the requested information at the prompts.
This command uploads the device conguration to the customer-dened FTP server, making it available for downloading. For
more information about this command, refer to the Fabric OS Command Reference.
switch:admin> configupload
Protocol (scp or ftp) [ftp]: ftp
Server Name or IP Address [host]: 123.123.123.123
User Name [user]: Admin24
File Name [config.txt]: config-switch0.txt
Password:
Upload complete
switch:admin>
• Alternatively, you can save the
conguration le to a Brocade USB device.
3. Record the WWN value: Enter wwn; then copy the command output into a le named cong-miscinfo.txt.
switch:admin> wwn
10:00:00:60:69:00:00:0a
4. Record the IP address information.
Enter ipAddrShow -sw; then copy the command output into the cong-miscinfo.txt le.
switch:admin> ipaddrshow -sw
SWITCH
Ethernet IP Address: 10.32.50.12
Ethernet Subnetmask: 255.55.0.0
Fibre Channel IP Address: 1.2.3.4
Fibre Channel Subnetmask: 255.255.255.0
CP0
Ethernet IP Address: 10.32.50.10
Ethernet Subnetmask: 255.55.0.0
HostName : cp0
Gateway Address: 10.32.40.1
CP1
Ethernet IP Address: 10.32.50.11
Ethernet Subnetmask: 255.55.0.0
HostName : cp1
Gateway Address: 10.32.40.1
Backplane IP address of CP0 : 10.0.0.6
Backplane IP address of CP1 : 10.0.0.7
switch:admin>switch:admin>
Chassis removal and replacement
Brocade DCX 8510-8 Backbone Hardware Installation Guide
142 53-1002180-15

Brocade Communications Systems DCX 8510-8 Specifications

General

Brand	Brocade Communications Systems
Model	DCX 8510-8
Category	Switch
Language	English