Brother CS8000 Series - Page 199

5 - 25
Failure Investigation
for Electronic Parts
Failure Investigation for Electronic Parts Error is displayed
Y
Connect the NP PCB assy. to
CN1 (S2) or CN2 (S3) on the
main PCB assy. correctly
Is the NP PCB assy. correctly
connected to CN1 (S2) or CN2
(S3) on the main PCB assy.?
N
Replace NP PCB assy.
"F6 (S2) or F06 (S3)" is displayed
S2 : CS8000 Series
S3 : CS8100 Series
www.promelectroavtomat.ru