2-25
Confidential
Jam MP Tray
The registration front sensor does not detect
paper pass within the specified time after the
paper was picked up from the MP tray.
8C00 2-47
Jam Rear
The eject sensor remains ON (paper pass
detected) for more than the specified time
even after the registration rear sensor detected
the end of paper pass.
8400 2-44
Jam Tray 1
The registration front sensor does not detect
paper pass within the specified time after the
T1 paper feed sensor detected paper pass.
8A00 2-46
Jam Tray 2
The registration front sensor does not detect
paper pass within the specified time after the
T2 paper feed sensor detected paper pass.
8B00 2-46
Log Access Error Log registration failed.
0C01
0C02
0C03
0C04
2-31
Machine Error F9 The country code was not entered correctly. F900 2-68
Manual Feed
There is no paper set in the MP tray when
feeding from the Manual is designated from
the driver.
9A00 2-52
No HUB Support
A USB device with a built-in hub is connected
to the USB terminal.
---
No Paper
When printing from the MP tray, the MP paper
empty sensor detected that there was no
paper set in the MP tray.
9300 2-49
When printing from paper tray 1, the T1 paper
feed sensor detected that there was no paper
set in paper tray 1.
9400 2-49
When printing from paper tray 2, the T2 paper
feed sensor detected that there was no paper
set in paper tray 2.
9500 2-50
When printing with the tray designation set to
AUTO, the MP paper empty sensor, T1 paper
feed sensor and T2 paper feed sensor all
detected that there was no paper set in the MP
tray, paper tray 1 and paper tray 2.
9600 2-50
No Toner
The toner sensor detected that the toner
cartridge was not set.
4400 2-35
No Tray
The T1 paper feed sensor detected that paper
tray 1 was not set.
8500 2-45
Out of Memory
There is insufficient memory to expand PC-
print data.
C700 2-61
The memory size allotted for Secure Print was
exceeded when saving Secure Print data.
C800 2-61
The program cannot be updated due to
insufficient memory.
---
Replace Parts Drum
The number of rotations of the drum unit has
reached the life limit. (Printing does not stop.)
5000 2-35
Replace Parts Fuser
Unit
Printable pages set for the fuser unit have
reached the limit. (Printing does not stop.)
5400 2-36
Replace Parts Laser
Unit
Printable pages set for the laser unit have
reached the limit. (Printing does not stop.)
5500 2-36
Error Message Description
Error
codes
Refer
to:
To Next Page
Loading...
Need help?
General
