EasyManua.ls Logo

Brother GTX600NB - Page 255

Brother GTX600NB
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-4
Troubleshooting
"x" is displayed for the remaining ink level after refilling ink.
Probable Cause Remedy Reference
Is ink of a wrong color refilled? Refill the right ink. If ink colors are mixed in the
ink tank as the result of refilling ink of a wrong
color, contact your dealer.
-
The remaining volume indication of the ink tank does not reflect the actual status
Probable Cause Remedy Reference
Check if the remaining ink level
correction was skipped or an
incorrect value was entered for
the correction.
Perform the remaining ink level correction
again.
"6-1-4. Correcting the remaining
ink level >>P.6-10"
Ink is leaking from the lower right side of the printer
Probable Cause Remedy Reference
Is the degassing module not out
of order?
For help, please contact your dealer.
-
Water supply error
Probable Cause Remedy Reference
Is a humidifier water supply error
displayed?
If a water supply error occurs, the humidifier will
stop working. Perform [Humidification start] from
the menu.
-
Start humidification from the menu after
confirming the following two points. If the
problem persists, contact your dealer.
Make sure the water tank is filled with water.
Make sure that the main faucet of the water
supply section (pure water equipment and
tank) is open.
Is a water supply shortage error
or a water supply failure error
displayed?
If you are using a tap water supply, make sure
that the main tap and water supply pressure are
sufficient.
If you are using a water tank, make sure the
water tank is filled with water.
Ascertain the water supply tube is not broken or
crushed.
Check if the installation height of the water
supply tank is appropriate.
"1-5. About the humidifier
>>P.1-19"

Table of Contents

Other manuals for Brother GTX600NB

Related product manuals