Brother GTX600NB - Page 276

9-5
Error message
Error code Error message Description
Remedy
1500 [Replace mist fan filter]
The mist fan filter needs to be
replaced.
Select the [Replace mist fan filter] menu item
and replace the mist fan filter.
1501 [Replace mist fan filter]
The mist fan filter needs to be
replaced.
Select the [Replace mist fan filter] menu item
and replace the mist fan filter.
1600 [Replace flushing foam]
The flushing foam needs to
be replaced.
Select the [Replace maintenance unit parts]
menu item and replace the flushing foam.
1601 [Replace flushing foam]
The flushing foam needs to
be replaced.
Select the [Replace maintenance unit parts]
menu item and replace the flushing foam.
1801 [None after head change]
Because color head A has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Select the [Install Ink after Replacing Head]
menu item to install the ink for color head A.
1802 [None after head change]
Because color head B has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Select the [Install Ink after Replacing Head]
menu item to install the ink for color head B.
1803 [None after head change]
Because white head A has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Select the [Install Ink after Replacing Head]
menu item to install the ink for white head A.
1804 [None after head change]
Because white head B has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Select the [Install Ink after Replacing Head]
menu item to install the ink for white head B.
1901
[Perform Initial Ink
Installation]
Initial ink installation has not
been performed yet.
Select the [Initial Ink Installation] menu item to
implement initial ink installation.
1902 [Install initial ink (KYCM)]
Initial ink installation for the
color heads has not been
performed yet.
Install color ink using the [Initial Ink Installation]
menu item and complete the process.
1903 [Install initial ink (W)]
Initial ink installation for the
white head has not been
performed yet.
Install white ink using the [Initial Ink Installation]
menu item and complete the process.
1910
[Attach maintenance
parts]
Maintenance unit parts are
not installed.
Refer to the Setup Manual and use the
[Replace maintenance unit parts] menu item to
install wipers, flushing foam, carriage foam, etc.
1922
[Time for technical
maintenance
Contact service engineer]
Periodical maintenance and
inspection are needed now.
For help, please contact your dealer.
1924
[Time for technical
maintenance
Contact service engineer]
Periodical maintenance and
inspection are needed now.
For help, please contact your dealer.
1925
[Time for technical
maintenance
Contact service engineer]
Periodical maintenance and
inspection are needed now.
For help, please contact your dealer.