Brother GTX600NB - Page 282

9-11
Error message
Error code Error message Description
Remedy
4101
[USB flash drive Access
Error]
File creation is not possible in
USB flash memory.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
4103
[USB flash drive Access
Error]
The file in the USB flash
memory is not accessible.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
4104
[USB flash drive Access
Error]
The file in the USB flash
memory is not readable.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
4105
[USB flash drive Access
Error]
The file in the USB flash
memory is not writable.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
4106 [Illegal Format]
The file in the USB flash
memory is not accessible.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
4108
[USB flash drive Access
Error]
The file in the USB flash
memory is not readable.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again,
and perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
4200 [Machine Error]
An error has been detected
in the display data on the
LCD screen.
In the event that this error is displayed after
suspending the updating of firmware, please
start the updating operation over from the
beginning.
If the problem persists, please contact your
dealer.
4201 [Machine Error]
An error has been detected
in the display data on the
LCD screen.
In the event that this error is displayed after
suspending the updating of firmware, please
start the updating operation over from the
beginning.
If the problem persists, please contact your
dealer.
4202 [Machine Error]
An error has been detected
in the display data on the
LCD screen.
In the event that this error is displayed after
suspending the updating of firmware, please
start the updating operation over from the
beginning.
If the problem persists, please contact your
dealer.