Brother GTX600NB - Page 284

9-13
Error message
Error code Error message Description
Remedy
5020 [Machine Error]
An error has been detected
during carriage control.
If the problem persists even after reactivating
the printer, please contact your dealer.
5021 [Machine Error]
An error has been detected
during the operation of the
heads.
If the problem persists even after reactivating
the printer, please contact your dealer.
5022 [Machine Error]
An error has been detected
during the operation of the
heads.
If the problem persists even after reactivating
the printer, please contact your dealer.
5080 [Machine Error]
An error has been detected
during maintenance unit
control.
If the problem persists even after reactivating
the printer, please contact your dealer.
5081 [Machine Error]
An error has been detected
during maintenance unit
control.
If the problem persists even after reactivating
the printer, please contact your dealer.
5094 [Machine Error]
An error has been detected
during platen loading.
If the problem persists even after reactivating
the printer, please contact your dealer.
5095 [Machine Error]
An error has been detected
during platen unloading.
If the problem persists even after reactivating
the printer, please contact your dealer.
5096 [Machine Error]
An error has been detected
while the platen is in
operation during printing.
If the problem persists even after reactivating
the printer, please contact your dealer.
5200 [Machine Error]
An error has been detected
when the color 1 wiper was
operated.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
5201 [Machine Error]
An error has been detected
when the color 2 wiper was
operated.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
5202 [Machine Error]
An error has been detected
when the white 1 wiper was
operated.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
5203 [Machine Error]
An error has been detected
when the white 2 wiper was
operated.
Check and see if any source produces a loud
noise near the printer. If the problem persists
even after reactivating the printer, please
contact your dealer.
5210 [Machine Error]
An error has been detected
when the cap was operated.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
5211 [Machine Error]
An error has been detected
when the cap was operated.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
5221 [Machine Error]
An error has been detected
when the color 1 suction
pump of the maintenance
unit was operated.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.