5-17
Confidential
1.3.10 Print Dump List (function code: 40)
<Function>
This function is to print the EEPROM information.
<Operation Procedure>
(1) Press the [ ] or [ ] button in the initial state of maintenance mode to display
"Maintenance 40" on the LCD.
(2) Press the [OK] button. "E2PDUMP ENGN ALL" is displayed on the LCD.
(3) Press the [ ] or [ ] button to select the information to be printed.
(4) Press the [OK] button. "E2PDUMP PRINTING" is displayed on the LCD, and printing
starts.
(5) When the EEPROM information has been printed, the machine returns to the initial state
of maintenance mode.
(6) When the [Cancel] button is pressed during printing, printing is stopped and the machine
returns to the initial state of maintenance mode.
LCD Description
E2PDUMP ENGN ALL Print all values stored in E2PROM for the engine controller (1-page
printing)
E2PDUMP MAIN TOP Print values stored in E2PROM for the first 1 kbyte for the main
controller (1-page printing)
E2PDUMP MAIN BTM Print values stored in E2PROM for the last 1 kbyte for the main
controller (1-page printing)
E2PDUMP MAIN ALL Print all values stored in E2PROM for the main controller (8-page
printing)