2-28
Confidential
4. TROUBLESHOOTING
4.1 Error Cause and Remedy
Error code 0B00
This error does not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
An unidentified error occurred.
Error code 0C01/0C02/0C03/0C04
Log registration failed.
Error code 0D00
Data cannot be saved because storage data area in the memory is full.
---
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Log Access Error.
<User Check>
• Follow the User's Guide to set the network again.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Storage Full
<User Check>
• Print the Storage Print Data.
• Expand DIMM.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
