2-22
Confidential
Cartridge
Error
Open the Top
Cover. Check color
and position of
toner cartridges
Toner cartridge other than black
is installed.
2100 2-54
Toner cartridge other than
yellow is installed.
2101 2-54
Toner cartridge other than cyan
is installed.
2102 2-54
Toner cartridge other than
magenta is installed.
2103 2-54
Put the Black (BK)
Toner Cartridge
back in.
The new toner sensor of the
toner cartridge (black) could not
detect a new cartridge properly.
4F01 2-60
Put the Cyan (C)
Toner Cartridge
back in.
The new toner sensor of the
toner cartridge (cyan) could not
detect a new cartridge properly.
4F04 2-60
Put the Magenta
(M) Toner Cartridge
back in.
The new toner sensor of the
toner cartridge (magenta) could
not detect a new cartridge
properly.
4F03 2-60
Put the Yellow (Y)
Toner Cartridge
back in.
The new toner sensor of the
toner cartridge (yellow) could
not detect a new cartridge
properly.
4F02 2-60
Condensation Leave switched
ON. Fully open the
Top cover. Wait 30
minutes, switch
OFF and close
cover, then switch
ON.
Condensation occurred in the
machine.
* Error message of second line
is incorrect and “Turn the
power switch off” is
unnecessary. This will be
corrected by Firmware version
up later on.
1400 2-53
Cooling Down Wait for a while
The internal temperature sensor
detected a temperature higher
than the specified value.
6801 2-64
Cover is Open Close the Top
Cover.
The top cover sensor detected
that the top cover was open.
6001 2-60
Close the Back
Cover of the
machine.
The eject sensor detected that
the fuser cover was open.
6004 2-61
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
