2-37
Confidential
Jam 2-sided Pull the paper tray
completely. Check
inside the machine.
Or open the Back
Cover to remove
the jammed paper.
After the first side is printed in 2-
sided printing, the registration
front sensor does not detect
paper pass after a set period of
time.
7800 2-69
Jam Inside Open the Top
Cover. Pull out all
four drum and
toner cartridge
assemblies.
Remove the
jammed paper
After the registration rear sensor
detects paper pass, the eject
sensor does not detect paper
pass.
7000 2-67
Jam Manual
Feed
Pull out the
jammed paper from
Manual Feed and
press [Retry].
When feeding from the manual
feed slot, the registration rear
sensor does not detect the
paper pass within the specified
time after the manual feed
paper empty sensor detected
the paper pass. Or the
registration rear sensor
detected the paper pass within
the specified time after the
manual feed paper empty
sensor detected the paper pass.
7900 2-69
Jam Rear Open the Back
Cover and remove
the jammed paper,
then press [Retry].
After the registration rear sensor
detects the end of paper pass
and the specified period of time
has passed, the eject sensor
continues to detect paper pass.
7100 2-68
Jam Tray 1 Pull the paper tray
completely out of
the machine and
remove the
jammed paper
When printing from the T1, the
registration front sensor does
not detect paper pass within the
specified time after the T1 paper
feed sensor detected paper
pass.
7302 2-68
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
