Brother HL-L3210CW - Page 99

2-80
Confidential
■ Error code C001
Timeout occurred with access request sent to server due to incorrect server address, network
disconnection, or inactive server.
Error code C002
User authentication is unavailable due to incorrect user name, incorrect password, or
asynchronous date and time between the machine and server.
Error code C003
Access to a file is unavailable due to incorrect directory name, no write permission on
directory, file write lock, or no write permission on file.
Error code C004
Cannot acquire current time which is required for user authentication because the time has not
been acquired.
<User Check>
• Refer to the online User’s Guide to set the network again.
• Check the LAN cable routing.
• Check the wireless LAN settings.
■ Error code C700
The memory is insufficient to expand the data of PC-Print.
Error code C800
The memory used to store secure print data exceeded the memory size for secure print data.
Error code C900
Storage memory was full and data could not be saved.
<User Check>
• Print the print data stored in the memory.
• Divide the print data and print them separately.
• Organize data inside the storage memory.
Step Cause Remedy
1
Connection failure of the wireless
LAN PCB connector
Reconnect the wireless LAN PCB
connector.
2 Wireless LAN PCB failure Replace the wireless LAN PCB.
3 Main PCB failure Replace the main PCB.
Step Cause Remedy
1 Main PCB failure Replace the main PCB.