Brother MFC-8880DN - Page 218

4-39
Confidential
(25) Remove the four bind B M4x12 Taptite screws, and remove the NCU cover.
Fig. 4-60
(26) Remove the Screw pan (S/P washer) M3.5x6, and remove the NCU FG harness ASSY.
(27) Remove the NCU FG harness ASSY from the Guide part of the Joint cover.
Fig. 4-61
Taptite bind B M4x12
Taptite bind B M4x12
NCU cover
Joint cover ASSY
Screw pan (S/P washer) M3.5x6
NCU FG harness ASSY
Joint cover ASSY