Brother MFC-8880DN - Speaker ASSY; CCD Model

5-163
Confidential
9.13 Speaker ASSY
■ CCD model
9.13.1 Speaker ASSY
(1) Disconnect the connector of the Speaker harness from the Main PCB.
Fig. 5-188
(2) Remove the bind B M4x12 Taptite screw.
(3) Remove the Speaker hold spring and Speaker ASSY.
Fig. 5-189
Note:
• In the case of the CIS model, refer to "9.13.2 Speaker ASSY".
Speaker harness
Main PCB
Main PCB
Speaker ASSY
Speaker hold spring
Taptite bind B M4x12